Do you find that you’re having to put water into your Kohler toilet bowl after flushing or having to stand around waiting to flush another time? If that happens, the water level in your toilet bowl is too low. But, in most cases, you can address this problem without calling a professional. So, you’re probably wondering how to adjust water level in Kohler toilet bowl.

In this article, we will talk about how to adjust water level in Kohler toilet bowl without a professional.
To adjust the water level in your Kohler toilet bowl, you simply need to readjust the water flow by pushing the ballcock back a tiny bit to increase the height and flow of the water in the toilet tank. To do this, you need to pull it outward to reduce the level of water. You can turn it counterclockwise to lower the water level and clockwise to raise the water level.
If you want a more in-depth look at the steps that you need to take to answer the question, “How to adjust water level in Kohler toilet bowl?”
Related:
How Do I Adjust the Water Level in a Kohler Toilet Bowl?
There are six simple steps that you need to take to adjust the water level in a Kohler toilet bowl.
1. Take Off the Toilet Tank Lid
Take the lid off the toilet tank and look to check the level of the toilet water.
2. Check to See if Water Refills to the Right Level
Find the toilet’s float valve; this is the tube that’s connected to the ball. The float valve is used to adjust the fill rate of the tank and affects the water movement in the toilet bowl.
3. Readjust the Water Level
Locate the ballcock and push it back a tiny bit to raise the height and flow of water in the tank.
Pull the ballcock towards the end of the tube (this would be outward) to lower the water level in the tank. You can turn it counterclockwise to lower it and clockwise to raise the water level. If you find that the ball is too tight, you can use a spanner to move it.
When you find the adjustment clip, squeeze it and slide it left or right. Pushing it forward will increase the water level and push it outward to decrease the water level. By doing this, you’re adjusting the float valve, which helps with the water flow into the rim feed hoses.
The hoses feed into the toilet rim holes and help drain the bowl when you flush the toilet. Every time that you flush a toilet, there’s a little bit of water that remains inside the bowl.
4. Readjust the Flow of Water to the Holes in the Rim
Rim holes put water from the flush valve into the toilet tank. You should adjust the flush valve to help the rim holes. Having a low water level is usually caused by disconnected flush valves.
You can fix this issue by putting the flush valve in the right position. To do this, pull the flush valve up and insert it into the drain that’s inside the canister. For canister filling toilets, insert the tube in the hose feed located in the center of the canister.
You should never leave the flush valve hanging inside the canister. You always want to make sure that it’s connected.
Some toilets use a flapper valve. To fix this kind of toilet, you want to connect the water pipe located next to the ballcock into the flush valve. Again, you never want to leave the flush valve hanging inside the tank.
5. Flush the Toilet
Now that you’ve adjusted everything, it’s time to flush the toilet to see if it fills to the desired water level. If you notice that it doesn’t fill to the desired level, you can redo the steps before this.
6. Replace the Toilet Tank Lid
You want to prevent anything from falling into the toilet tank and causing a clog, so always make sure that you’re replacing the toilet tank lid after performing an adjustment.

Conclusion
After you’ve adjusted the water level of your Kohler toilet bowl, you want to flush as usual. After the toilet drains, the water left inside the toilet should be enough for the next flush. If the water level is too low, you’ll start to notice that more than one flush is required.
You always want to make sure that the tank connections are connected properly. Of course, the biggest problem area is the flush valve, but you could also run into issues with clogs inside the tank.
Frequently Asked Questions (FAQs)
Why Does the Water Level in my Toilet Bowl Seem Low Kohler?
The rim feed hose directs water into your toilet bowl when the water is refilling after a flush. If it hasn’t been properly installed into the flush valve, the water level in your Kohler toilet bowl can seem low.
How Much Water Should be in Your Toilet Bowl?
The amount of water that should be in your toilet bowl after flushing should be about an inch below the opening of the overflow tube. If it’s lower than that, there may not be enough water left inside the toilet bowl after a flush.
Why Does My Toilet Bowl Fill So High?
Having high water in your toilet tank could be caused by a misadjusted float, but high water in your toilet bowl can be caused by a clog or a worn flapper. If you’re noticing any problems with the float or the flapper, you’ve probably also noticed that your toilet fill valve has been cycling on and off or running constantly.
To fix this problem, you need to readjust the float or replace it and the flapper.