How to Remove Bemis Toilet Seat Cover

Learning how to remove a Bemis toilet seat cover should not be a daunting task. However, you may have to remove the cover from the bolts and use a screwdriver to remove it while still holding the wing nut on the bottom. If you have, at one time, wanted to acquire a toilet seat, you must have come across Bemis.

Bemis Toilet Seat Cover

Bemis is a USA plastic products manufacturer that takes pride in it’s over 110 years in the industry. With such vast experience, you’re guaranteed high-quality products, and Bemis toilet seats are no exception.

You may find that toilet seats are regularly changed in apartments, especially when a new tenant is coming. This is because the process of switching out the toilet seat is easy and takes just a few minutes.

How do you remove a Bemis toilet seat cover? A Bemis toilet seat cover is designed for easy fixes, removal, and adjustments. They have screws for easy opening, and those screws attach the Bemis seat to the toilet.

Most people appreciate Bemis seats for their durability and flexible hinges. In addition, it makes it easy and safe to remove and replace the seat.

The older versions use a wing nut and a plaint bolt. However, the modern Bemis toilet seats use Sta-Tie and Top-Tite for easy cleaning and adjustments purposes. The modern versions are also more advanced and give homeowners an easy time when removing, replacing, and even cleaning them.

The Bemis seat cover is held by sturdy metal bolts fixed with nylon washers to prevent rusting. Follow these easy yet effective steps to remove the Bemis seat cover.

Step #1: Locate the Fasteners

The fasteners are located below the side of the toilet that corresponds with the top side location. You can also find the fasteners beneath the cover by the hinges of the toilet seat. Upon locating the fasteners, you need to determine the types of heads they use.

Usually, there are four types of fastener heads:

  • Slotted head – This is the most widely available fastener head because it’s effective, simple, and inexpensive. However, it works best when hand-driven.
  • Pozidriv head – It’s an eight-point contact head. It’s more versatile and has a superior grip.
  • Philips head– The product is characterized by a pointed tip, rounded corners, and tapered flanks.
  • Squarehead – It has a distinctive design with a square-shaped socket and a square protrusion. The socket and tool ate slightly tapered. It’s a popular fastener, especially when combined with Philips type.

Knowing the fastener heads you have helps you figure out the right tools to use. But sometimes, you may find the toilet is held by a wing nut that’s easy to hold by hand.

Step #2: Remove the Bolt

Depending on the style used, you may need to use your fingers or a wrench. However, the head of the fastener might need a wrench or a screwdriver. Whatever tool you use, rotate the bolt counterclockwise to remove it.

Step #3: Clean the Rim

You’ll find the area where the fasteners are located to be dirty. You may use a flat razor to get rid of hardened buildup and clean up the area.

Step #4: Remove the Cover Based on Design

Bemis seats come in two distinct designs:

Sta-Tite Toilet Seat

This design is fastened by a threaded rod that’s screwed directly into the hinge. The fastener uses a special plastic nut to achieve the best torque. To remove a Sta-Tite seat, just unscrew the nuts beneath the toilet bowl and pull the seat off.

Top-Tite Toilet Seat

This variety of Bemis toilet seat uses a nut and bolt like a classic toilet seat. However, both bolt and nut are made of plastic with heads that easily fracture when the proper torque is achieved.

To remove a Top-Tite seat cover, you need to expose the bolt head by removing the caps. Use a socket to hold the plastic nut that’s on the bottom. Using another socket or a wrench, unscrew the fastener while holding the bottom.

Then pull the seat slowly and safely.

Once the toilet cover is off, you’ll need to replace it with a new one. Fortunately, installing a Bemis toilet seat cover is easy since your order comes with a detailed instruction manual.

The Bottom Line

The toilet seat is a crucial part of your toilet. A Bemis toilet seat is economical, durable, and reliable. Therefore, it’s crucial to learn how to remove the Bemis toilet seat cover and clean and install a new one. The above procedure will make you realize that the process is seamless and the help of a specialist is not really needed.

Frequently Asked Questions (FAQs)

How do you dismantle a Bemis toilet seat?

The design of the toilet bowl hasn’t changed much since its invention. It’s still the same design where the nuts holding the toilet seat are located below the bowl. If you want to dismantle the toilet seat, find the wing nut beneath the bowl.

Use the screwdriver to pull off the bolt and repeat the same with the other bolt. Once you dismantle the seat, place the unwanted hardware in a plastic bag and dispose of it.

How do you change a Bemis toilet seat?

A Bemis toilet seat has an easy replacement process. You don’t necessarily need any skills to change the cover. Pull at the end of the toilet seat hinges and place the seat in a safe place. Then place the washer on the toilet seat hinges and tighten it. And just like that, you’re done replacing the Bemis toilet seat.

How do you take off a toilet seat cover?

Bemis toilet seat covers are usually held in place securely, and you’ll rarely hear cases of these products coming out of place. But if you want to take off the seat cover, you need to relax the nuts and remove them using a screwdriver.

How do you remove a Bemis Push and Clean toilet seat?

Removing the Bemis Push is relatively easy. Simply raise both the cover and ring into an upright position. Then push the seat down to release and take off. The Push and Clean system makes it easy to clean your toilet.

Once the toilet is clean, push the clean seat back into the pan.

How do you remove a slow-close toilet seat?

A slow close, or customarily called soft-close toilet, gently and automatically lowers itself. It means the toilet remains down all the time. It saves time and minimizes bathroom use disputes. The seat is usually attached with screws enclosed in a plastic hinge cap.

You’ll need a screwdriver or wrench to remove this toilet seat.

Leave a Comment

Your email address will not be published.