The Whirlpool washer is a popular and generally reliable home appliance, but it can create leaking problems for some homeowners. Even though it’s designed to be efficient, it can have dripping water issues if not properly maintained.
When your whirlpool washer is dripping water into the tub, it could be due to a faulty or clogged water inlet valve, an obstruction in the water supply line, or insufficient pressure in the hot and cold water system. It can also result from loose or clogged hose connections or electrical issues.
The most common problem with this leak is that it happens even when you’re not using your washer. Read on to learn the possible causes of your whirlpool washer dripping water into the tub.
Dirty or Clogged Water Inlet Valve
A whirlpool washer water inlet valve controls the cold and hot water flow into the washing machine tub so that it fills up evenly and does not overflow.
It’s essential to clean the washer’s water inlet valve regularly to prevent sediment buildup and corrosion, which may cause it to stop working correctly.
A dirty or clogged water inlet valve can cause a whirlpool washer to leak. It is a common problem for the water inlet valve to get clogged with dirt and debris, which can cause the washer to leak water into the tub when it is not in use.
How To Fix It
Turn off the cold and hot water valves, clean the water inlet valve with a soft brush or cloth, and then rinse off with clear water to restore normal water flow pressure. If you notice that there’s still a leak, then ensure that the drain hose isn’t kinked or twisted and that there are no other leaks around the cold or hot water inlet valves.
Inspect the filter screens in the inlet valves to ensure they are free of dirt and clogs. You should clean the screens carefully if they are dirty. If these problems persist, then contact a service expert for help!
Watch the following video to learn the basic steps of cleaning your washing machine filter screens:
Faulty Water Inlet Valve
A faulty water inlet valve is an issue that affects a lot of washing machines. It’s essential to know how to identify the problem so that you can then fix it. When water drips into your whirlpool washer tub when the washer is not in use, the most common cause is a faulty water inlet valve.
A faulty water inlet valve can cause various problems with your washing machine. Most notably, it can prevent your clothes from getting properly clean, leaving them with excess detergent residue on them.
Knowing and diagnosing the signs of a faulty water inlet valve is essential. Here are some of the most common signs:
The washer does not fill with water.
The clothes are not getting cleaned thoroughly.
There are signs of water dripping into the tub when the machine is not in use.
You can hear a hissing sound coming from the washer while it fills with water or drains out after the wash cycle has completed.
If clogged screens are not causing the leak, test your washer’s water inlet valve solenoids for continuity. To access the water inlet valve, you may need to open the front or back panel, depending on your washer model.
How To Fix It
The first thing you need to do when there’s a faulty water inlet valve is to check if the machine has power, and if it doesn’t, then check your circuit breaker or fuse box for any blown fuses or tripped breakers. If there’s no power going through the machine, then you need to call an electrician or repairman who’ll be able to fix this for you.
Use a multimeter to test the water inlet valve for continuity. A faulty inlet valve solenoid will show a zero resistance reading, while a good valve solenoid shows a reading of 500 to 1500 Ohms of resistance.
Troubleshoot and determine whether the hot or cold inlet valve is faulty. Check for electrical wiring issues or low voltage that can cause the inlet valve to malfunction.
Here’s a video showing how to test a whirlpool washing machine’s water inlet valve for continuity:
Insufficient Water Pressure
The washing machine is connected to the water source by a hose. The Whirlpool washer can drip water into the tub if there is insufficient water pressure causing the valves not to close properly.
Water pressure is important when it comes to the washing machine. If the water pressure is too low, it’ll cause a leak. The leak happens when the washing machine does not get enough water pressure causing it to drip water into the tub and overflow.
You can avoid this by checking for signs of insufficient water pressure in a washing machine. If you notice that your clothes are not getting clean or there are water leaks into the tub when the washer is not cleaning, this could indicate insufficient water pressure in your washing machine.
How To Fix It
The water pressure to the valve must be between 20 to 116 psi. A pressure below 20 psi can cause your Whirlpool washer to drip water into the tub. Ensure your washing machine receives enough water pressure before replacing the inlet valve.
It’s also crucial to check for loose or clogged water hoses affecting water pressure in the Whirlpool washer.
Why It Is Worth Fixing Whirlpool Washer Dripping Issues
There are many reasons why it is worth fixing Whirlpool washer dripping issues. One of the most important reasons is that it’ll save you money on your water bill. Leaks can add up to a lot of wasted water, eventually leading to high water bills.
A dripping washer is not just a minor inconvenience. It can lead to mold and mildew growth, which can cause serious health problems. There are different causes of Whirlpool washer dripping Issues, but most of them are minor problems that you can fix without special tools or professional help.
Final Thoughts
Appliances can be a great convenience in our lives, but they can also be a big headache when they break or malfunction. If your Whirlpool washer is dripping water into the tub, you should check for a clogged water inlet valve, an obstruction in the water supply line, or insufficient pressure in the water system.
It’s crucial to call a professional appliance repair technician as soon as possible when you have problems with your Whirlpool washer. A professional will have the knowledge and tools necessary to fix your washer quickly and efficiently.
![[Solved] A.O. Smith Tankless Water Heater Stuck in Standby Mode](https://homeguidecorner.com/wp-content/uploads/2022/10/A.O.-Smith-tankless-water-heater-stuck-in-standby-mode-150x150.jpg "[Solved] A.O. Smith Tankless Water Heater Stuck in Standby Mode")
