Samsung Washer Not Draining – Possible Reasons and Solutions

Having a functional Samsung washer is an excellent addition to your household. But having a water overflow can turn your laundry time into a nightmare.

Is your Samsung washer not draining? The main reason behind this problem can be related to the way you set up your washer.

If it’s not level, the drain filter or pump won’t work properly. Other reasons can also cause your Samsung washer to overflow, and these include a clogged hose or a clogged filter. Luckily, if your Samsung washer isn’t draining, you can fix this problem easily.

Your Samsung Washer Is Not Level

Samsung washer is not level

In order for your washer to drain properly, it has to be level. When the washer is tilted, the pump that drains the water will fail to work.

If the ground or the surface where you’re setting up your washer isn’t level, you will encounter problems regarding water draining. This is why you need to check it from the right, left, front, and back.

If your Samsung washer has adjustable feet, try to fix them. If the feet can’t be adjusted, you can add pieces of cardboard or wood under the feet to make the washer level. In some cases, the feet might break, and you can replace one of them by adding a piece of cardboard or wood to make sure that the washer is level.

Once the washer is level, drain it manually so it’s ready for the next load. Here are the steps you need to follow to drain your washer if it’s a front-loading model.

  1. Turn off the water supply to the washer to make sure that you’re not adding more water.
  2. Switch off the power.
  3. Check the service flap at the bottom of the washer’s front panel.
  4. Place a bowl or a large bucket close to the washer and put the emergency drain hose inside it.
  5. Remove the safety plug from the emergency drain hose to allow the water to flow.

A top-loading model can also be drained, but there are different steps that you need to follow.

  1. Start by turning off the water supply and unplug the washer to make sure that it’s not connected to a power source.
  2. Move the washer, so you can access its back panel.
  3. Place a bucket or a bowl next to the washer’s back panel.
  4. Take the drain hose and put it into the bucket.
  5. Remove the plug and allow the water to drain.

Related: Samsung Washer Not Spinning? Troubleshooting Guide

Your Drain Hose is Clogged

After doing your laundry, the water is pumped out from the washer and into the drain hose to the sink, tub, or outlet pipe. This pipe can be blocked, improperly installed, or kinked, and in this case, your Samsung washer won’t drain.

Before trying to drain your washer manually, you need to turn off the water and power supply. Depending on the model of your washer, you can check the drain hose.

Check the whole length of the drain hose. It might be clogged by a clothing item or an object that someone left in a pocket. If this is the case, removing this object will remove the blockage and allow the water to drain properly.

If the drain hose has been kinked or bent, this will stop the water from flowing properly. You can unbend the hose and untwist any kinked parts to allow the water to flow. If the hose looks too damaged, you can easily have it replaced.

Using a cheap kind of detergent can cause buildup and scaling that eventually clogs the drain hose. Lint can also be the culprit. The best solution is to use hot water and a good detergent to clean the hose and remove any buildup.

You should also check the connection between the hose and the drain pipe. If it’s not airtight, water won’t flow. If the hose is placed too far into the drainpipe or sink or if you’re using a hose extension kit, the hose won’t drain the water adequately.

Your Drain Filter is Clogged

The drain filter captures any objects that might be in the wash water, so it doesn’t clog your drain hose as it passes through with the water. However, with time, lint, paper scraps, or even mold can block the drain filter and prevent it from working correctly. Large objects like a twisted sock, a hairband, or a piece of jewelry can also block the drain.

The best thing you can do is clean the drain filter regularly. It might seem like a time-consuming task, but it’s crucial to keep your Samsung washer functioning the way it should. Here is what you need to do to clean the drain filter of a front-loader Samsung washer.

  1. Turn off the power supply and water.
  2. Remove the service flap at the bottom of the washer and place a bucket to catch any wastewater.
  3. Remove the filter by twisting it.
  4. Clean the filter using a soft-bristle brush under running water. Make sure that there are no dislodged objects.
  5. Place the filter and secure it in place.
  6. Place the service flap and turn on the washer.

The exact process should be followed if you have a top-loading washer. Here are the right steps to clean the drain filter.

  1. Start by turning off the water and power.
  2. Manually drain the water and remove the laundry.
  3. Open the lid and remove the filter.
  4. Scrub the filter using a soft brush under running water and remove any dislodged object that might be preventing the water from draining properly.

FAQs

1. What Might Clog My Samsung Washer?

Small clothing items like socks and delicates might clog your drain and stop the water from draining properly. Things that you forget in your pockets might also block the drain.

2. How to Know that the Washer Isn’t Draining?

There are two ways that show that your Samsung washer is draining the water properly. First, the water will sit in your washer for a long period. Moreover, you might see an error message that appears to show you that something is wrong.

Conclusion

Samsung washer

The main reason why your Samsung washer might not be draining is that it might not be level. There could also be something clogging the drain hose or drain, and you can easily clean them to get rid of the wastewater.

Leave a Comment

Your email address will not be published. Required fields are marked *