Different Types of Outdoor Faucets

You may not have given much thought to the type of outdoor faucet you need to install, but we’re here to tell you why it’s an important decision you need to make.

Different Types of Outdoor Faucets

There are many different types of outdoor faucets. Outdoor faucets come in different shapes, sizes, and designs. In fact, there are five primary outdoor faucets that you can choose from when searching among the many different types of outdoor faucets.

What are the Five Different Types of Outdoor Faucets?

Spigot

Spigots are the most commonly seen type of outdoor faucets because they are efficient and durable. Spigots are typically made from steel or brass which allow them to hold up against the outdoor elements. They are also easy to repair or replace over time.

Ball Valve

Ball valves have a ball inside the faucet that has chambers, rubber O-rings, and spring-loaded rubber seals that keep the faucet secure and efficient.

Anti-Siphon

Anti-siphon is an extremely clean outdoor faucet that is connected to a direct water line. The valve on the anti-siphon faucet prevents the water from becoming contaminated, making it one of the best options for accessing clean water outdoors.

Related: How to keep your water lines sediment free.

Frost-Free

The most common outdoor faucet seen in cold climates is the frost-free faucet. A frost-free faucet has a metal tube that prevents the water within it from freezing. This keeps the valves protected from becoming damaged when freezing.

Yard Hydrants

Yard hydrants are tall pipes that come out of the ground and are used to cover large outdoor areas. A yard hydrant is used by pulling the handle on the hydrant to access the water.

How Do I Identify My Outdoor Faucet Brand?

When looking for the brand of your outdoor faucet, you will need to inspect the faucet to look for any type of manufacturer’s name or logo printed on the faucet. This will be the first indicator of what brand your outdoor faucet is.

If there is no identifying name, check to see if there are any numbers printed on the faucet. This will likely be a serial number or a model number that can help you identify the brand of your outdoor faucet.

If there is no manufacturer’s name and no serial number or model number on the faucet, you will need to count the splines. The splines on the gear can help you narrow down the possible manufacturers of your faucet.

What is the Best Faucet for the Outdoors?

What is the Best Faucet for the Outdoors

The answer to this question may depend on where you live.

If you live in cold climates, you will want to choose a frost-free outdoor faucet. A frost-free outdoor faucet will prevent the water within the faucet from freezing. They are designed with a metal tube that will keep the water from freezing. This will prevent the valves within the faucet from cracking or becoming damaged due to freezing temperatures.

If cold weather isn’t an issue, then you can benefit from a typical outdoor spigot or a ball valve spigot. Both of these are common household outdoor faucets that are easy to repair, replace, or upgrade.

How Do You Replace an Outdoor Frost-Free Faucet?

Follow these step-by-step instructions for replacing an outdoor frost-free faucet.

Step One: Turn Off Water

This step is extremely important when you are replacing the outdoor frost-free faucet. You can turn the water off by using the shutoff valve on the outdoor water pipe or you may have to turn off your entire home’s water supply. Regardless, make sure you turn off the water before you do any other steps.

Step Two: Loosen the Faucet

You will likely need to use a screwdriver to unfasten the faucet from the house. You may also need to use a utility knife to cut through any of the caulk around the faucet flange.

Step Three: Remove the Faucet from the Supply Pipe

You will need to remove the faucet from the supply pipe within your home. To do this, you will turn the tongue-and-groove pipes that connect the supply pipe to the faucet until they have disconnected from one another.

Step Four: Remove the Faucet from the Wall

Now you are ready to remove the faucet from the wall. Go to the exterior of the house where the faucet is located and pull the faucet from the wall.

Step Five: Replace with a New Faucet

Make sure your new faucet is the same diameter and length as the faucet you have just replaced. Insert the pipe of the faucet through the exterior hole of the wall and connect it to the supply pipe. Tighten the pipe using pliers and make sure that the two pipes are fit securely together.

Step Six: Turn On the Water

Turn your water supply back on and test the new outdoor faucet. If you have successfully installed the replacement outdoor faucet, you will need to caulk the area to create a watertight seal to ensure there will be no leaks coming from your new faucet.

Should I Let My Outdoor Faucet Drip?

the flowing water on tap

It’s common to hear that you need to let your outdoor faucet drip if the weather is going to turn cold, but is this true?

Well, yes and no.

Yes, you should let your outdoor faucet drip if the temperature is going to turn cold but only if the temperature is going to be 28 degrees or below for more than four hours.

If the overnight temperature is only going to be 30 to 32 degrees, you won’t benefit from letting your outdoor faucet drip. Only when the temperature will be below 28 degrees for a prolonged time will you benefit from letting your outdoor faucet drip.

Letting your outdoor faucet drip when the temperature is below 28 degrees for more than four hours will prevent the water within the lines from freezing. This protects the outdoor faucet from cracking, leaking, or needing to be repaired or replaced.

Leave a Comment

Your email address will not be published.