How To Fix the LC Code on a Samsung Dishwasher?

You have done all your chores for the day, and you are just completing the last task of loading and unloading the dishwasher so that you can go to sleep. Suddenly, an error message pops up, and all your tiredness goes away. If you have dealt with something like this in the past, or are dealing with it now, you must continue reading.

Below we discuss everything about how to fix the LC Code on a Samsung Dishwasher. Just follow the instructions and don’t panic.

What is an LC error code?

 Samsung Dishwashe  LC error code

The simple answer is an LC error code is that there is a water leak in your dishwasher. The sensors installed on the appliance have detected a leak, and now they are warning you about it.

How to Remove the Samsung Dishwasher LC Code?

The simplest way to fix Samsung dishwasher LC Code is to unplug your kitchen appliance and wait for about 10-15 minutes. After that, you can plug in the power cord and restart the dishwasher. Usually, this simple step will reset the dishwasher and ensure that this Samsung dishwasher error goes away.

What if the Samsung Dishwasher LC Code is Still There?

If you have unplugged and replugged the appliance and the error code is still there, you need to consider whether you might have a faulty sensor or a water leak. Don’t panic if either of these is true, as there’s a proper solution for everything.

Sometimes, the bottom pan might be wet, and your dishwasher might show the LC code. You can just clean it with a soft cloth in such a scenario, and the error code will go away.

How to Find Out If You Have a Leaky Dishwasher and the Error Code LC is Correct?

If the solution mentioned above has not worked, likely, you might have a leaky dishwasher.

To check for a leak, you need to unplug the dishwasher, pull it out from the countertop and then take off the metal panel situated on the right side. Doing so will allow you to get access to the drain pump so that you can detect any visible water leakage.

If you can see water leakage around the drain pump, this confirms that your dishwasher has a water leakage problem and the LC error code was correct. It will also ensure that the leak sensor is working just fine.

Related Posts:

Questions to Ask Yourself When You Doubt a Samsung Dishwasher Leak

There are many reasons for water leakage in a Samsung dishwasher. If you suspect a leak, you should ask yourself the following questions:

1. Did you recently install or move the Samsung Dishwasher?

If you recently installed or moved the dishwasher, the leak sensor may have accidentally gotten some moisture on it, resulting in the LC error code. If that is the case, you should wait for the water to dry and reset the dishwasher. This might just solve your problem.

2. Did You Put a Lot of Detergent?

Many people make the mistake of overdoing it when they fill their dishwasher with detergent. Your appliance might detect the excess detergent and start showing the LC Error Code. It would help next time to use less detergent in the machine.

3. Did You Connect the Dishwasher to Garbage Disposal?

Recently connecting a garbage disposal to the dishwasher and forgetting to remove the cap can also lead to the LC error code. To fix the situation, all you need to do is remove the cap and reset your dishwasher. Also, do the garbage disposal right the next time!

What If the Issue is Still Not identified?

If you have tried all these questions and the issue is still not identified, you don’t need to panic. Simply follow the steps below, and you will probably get rid of the Samsung dishwasher error.

1. Disconnect it

The first step, for your safety, is to disconnect the dishwasher from the power source. You also need to turn the breaker off.

2. Get Access

When you want to remove your dishwasher from under the counter, you will find small clips fastened with some screws.

First, you need to remove the screws and slide the machine so that you can hold its bottom. Then you need to turn the machine on its side to get access to the area you need.

After turning the appliance on its side, you need to access the bottom panel. In some cases, there might be a tray here. The role of this panel or tray is to stop water from leaking to the floor beneath it.

There is a bowl in the middle of the bottom panel or tray. It is the sensor that sends an error code if there is water leakage.

3. Clean the Area

If there is water in the panel or tray, you can remove it using a dry cloth. Take away as much water as you can gently.

removing water in dishwasher tray

4. Relocate the Leak Sensor

The leak sensor is present in the drain pan or the bottom of your appliance. The next step is to find it and relocate it (by placing it a few inches higher) so that the error code doesn’t pop up again if there is slight moisture.

When you have opened the dishwasher, check the water lines and hoses to ensure no leaks are present. If you do find a leak, you will have to fix it. Otherwise, the error code will keep coming back as the leak sensor will repeatedly identify the same issue.

5. Re-Secure the Dishwasher

Most Samsung dishwashers can be easily re-secured. After cleaning the leak sensor and the surrounding area, all you need to do is to replace and secure the tray or panel back in the right place. Then you should slide the dishwasher back under the counter and redo the screws so that it fits perfectly.

6. Turn it On

The next step is to turn the dishwasher on by plugging it in and then see whether the error code LC is still there or not.

7. Test it

After you have powered on the dishwasher, it’s time to test whether you have succeeded in your attempt to clear the LC error code or not. If the error code is not there, you can pat yourself on the back as you have solved the problem and can now use the machine.

If the error code is still there, you might need to talk to the Samsung customer service team. Make sure you jot down your model number and can explain the problem.

Final Words

All in all, you can say that getting an LC error code on the Samsung dishwasher is not a big deal. You can follow a few simple steps and get the problem fixed at home without expert assistance.

However, if you have tried all the steps and the code is still there, you might want to call the experts to lend you a hand. It’s way better than DIY as the experts will ensure the problem is solved and never reoccurs.


What are the Steps to Resetting a Samsung Dishwasher?

If you want to reset the Samsung dishwasher, you need to press the start button and hold it for three seconds. That’s it. Now you can wait for the 1 symbol to show up and restart the cycle. It might take a few seconds as the dishwasher will empty itself to be able to restart perfectly.

Where is the Reset Button Located on the Samsung Dishwasher?

There is no reset button located on the Samsung Dishwasher. To reset it, you can either press and hold the start button for 3 seconds or unplug it, wait for 5 minutes, and plug it again.

Both the options work equally well. Just make sure your hands are dry when you plug and unplug the machine. It will help avoid you risking exposure to electric current.

Can I Fix the Leak Sensor on My Samsung Dishwasher?

Yes, you can fix the leak sensor on the Samsung dishwasher if there is a small amount of water or moisture on the sensor. If the sensor is faulty, you might need to connect with Samsung dishwasher customer care service.

They will send in some experts who will fix the sensor or replace it if needed. If you can’t afford an official visit from Samsung experts, you can contact a local technician to help you fix the problem.

Leave a Comment

Your email address will not be published. Required fields are marked *