How Do You Clean Dirty Walls Without Damaging the Paint?

Walls don’t need to be cleaned every day, but they do need to be cleaned every once in a while to ensure they don’t end up accumulating too much dirt and debris.

Not only will this help them look as best as possible, for an appealing image, but it will also keep them well-maintained, sometimes leading to a longer lifespan.

However, when you clean your walls, you need to take care not to damage any of the paint, or else you’ll just be ruining them more than anything! So how do you clean dirty walls without damaging the paint?

Luckily, cleaning painted walls is actually a lot simpler than many believe, and can be done in just a few easy steps.

First, however, you need to determine whether your wall has latex-based paint or oil-based paint, as this will affect how you clean it!

If the walls are latex-painted, these are the steps you should take:

  1. Create a cleaning solution by adding a few drops of dish detergent to a bucket of warm water. Alternatively, you could mix a few drops of white vinegar to a gallon of water, as this would also be a good cleaning solution!
  2. Use a sponge or cloth to apply the cleaning solution to the wall. However, make sure you aren’t soaking the wall, or else you’ll end up with streaks of water running down it.
  3. Wipe off the dirt from the wall, dipping the sponge back into the solution as many times as needed.

If the walls have an oil-based paint, then these are the different steps you should take:

  1. Start by doing the exact same you did with the latex-painted walls. That is, mix dish detergent with water (or white vinegar with water) and clean the wall with the help of a sponge or cloth.
  2. Once you’ve finished, add some degreaser product. This will be fine to use with the oil-based paint but would damage latex-painted walls. Just follow the instructions of the product, and it should help thoroughly clean the walls!

How do you clean fingerprints off walls?

If you have children at home, the probabilities of your walls ending up with fingerprints are pretty hard.

But not to worry, these types of stains are usually very easy to remove and can be done so without much of a struggle.

  1. Start by mixing half a cup of white vinegar or dish detergent, with some warm water. (The warmer the water the better this will work).
  2. Use a microfiber cloth to remove the fingerprint stains. For this, dip it into the cleaning solution, and make sure you remove any excess water so that it is damp and not soaking. (This will avoid water streaks).
  3. After you’ve removed the fingerprints from the wall, use some clean warm water to rinse the area, then dry it with a clean microfiber cloth. And that’s it!

How do you clean non-washable painted walls?

Non-washable painted walls are called non-washable because the paint will easily come off if you try to wash them.

So most cleaning products that you would usually use to wash your walls will instead just completely remove the paint, leaving your walls bare (and ruined).

The key to washing these non-washable painted walls, therefore, is to be as gentle as possible.

You need to remove the dirt, without removing the paint, so you shouldn’t use any harsh products, or be applying any amount of force. Just gentle cleaning.

Here is how to do it:

  1. Add a few drops of white vinegar to some water, and mix them into a spray bottle. (This is handy for many DIY cleaning hacks, so it’s good to keep around!)
  2. Spray some of the cleaning solution onto a microfiber soft cloth.
  3. Rub the cloth against the wall, very very gently, in a circular motion. This should lift the dirt, without damaging the paint at all.

How do you clean walls without removing flat paint?

To clean walls without removing flat paint, you have to make sure that you’re being as gentle as possible.

You also need to avoid using any force, and you should absolutely not use any harsh cleaning products whatsoever.
Instead, use some vinegar and warm water sprayed onto a soft cloth.

You can then use this cloth to gently rub the wall in a circular motion, to lift the dirt without removing the flat paint.

How do you get water streaks off painted walls?

Water streaks on painted walls are pretty common, especially if you’ve been washing them with excess water, soaking them instead of using a damp sponge or cloth.

These water streaks will look like greyish or faded lines that run down the wall, and they can be very unattractive.

Here is how you can get rid of them:

  1. Mix a few drops of white vinegar with a tablespoon of ammonia and some warm water.
  2. Test a small area of the wall to make sure this solution won’t cause any damage to the color of the paint itself.
  3. Apply the solution to the water stains, rubbing it in with a cloth or a sponge.
  4. Once the stains have been removed, avoid any further water stains by rinsing the area with warm water and then drying it with a microfiber cloth.

How do you wash walls with washable paint?

Washable paint is paint that has been formulated to be a lot more durable and resistant, so you are able to wash it without the color of the paint actually coming off.

It’s mostly used in homes where stains are common so that you can wash your walls without fear of damaging the paint.

To wash these walls, you can use many different cleaning products. You could also just mix some washing-up liquid with warm water, and apply it with the help of a sponge.

As the paint is washable, you should be able to apply more force when rubbing to remove the tougher stains.

Is vinegar good for cleaning walls?

Vinegar is the holy grail of cleaning and can be used in many DIY home hacks and for removing all sorts of tough stains.

In fact, you should just keep a spray bottle with a mix of water and vinegar, because it always comes in handy!

Vinegar is also excellent for cleaning walls, and it is one of the best solutions for gently cleaning walls without damaging or removing the paint.

Will rubbing alcohol damage wall paint?

Rubbing alcohol can be a great product for DIY cleaning hacks, and it is often used to remove tough stains that won’t come out otherwise.

However, rubbing alcohol contains ethanol, and this is a powerful solvent. This means that rubbing alcohol can completely remove varnish and finishing coatings from your wall and furniture, therefore damaging the paint to the point of no return.

So basically, do not use rubbing alcohol on your wall if it is painted, as it will almost certainly damage the paint!

Leave a Comment

Your email address will not be published. Required fields are marked *