How Can I Get My Toilet to Flush Stronger?

A toilet requires a lot of force to push waste down the drain without any obstruction. When toilets do not have enough flush power, it is known as a lazy toilet or slow-flush toilet, and it can become a frustrating problem figuring out how to make your toilet flush stronger.

How can I get my toilet to flush stronger? First, find the root of the problem.

The causes of this problem can be very varied, and depending on the reason, you can repair it yourself and avoid a high repair cost. More complicated repairs may require a plumber.

Get my toilet to flush stronger

To convert your toilet to a power flushing system, turn the water off to the toilet tank, grab a wrench and unscrew the nut holding the water supply line to the bottom of the toilet. You can then unscrew the plastic nuts and fittings to remove the flushing device and toilet flapper completely. You can then follow the instructions on your power flush conversion kit.

If you are wondering how to make your toilet flush stronger, you can find the causes and the solution here. Read on for some valuable information:

How Do You Fix a Weak Flushing Toilet?

Here is some information on fixing a weak flushing toilet and some reasons why your toilet may have a weak flush, to begin with.

Clear Any Obstructions in the Discharge Ports

Under the rim of the toilet, a series of holes are located that serves to drain the water from the tank into the bowl. These holes help replace dirty toilet water with clean tank water.

Unfortunately, over time and with regular use, these holes become clogged, causing the toilet to flush slowly. This problem can be solved by using a pointed instrument or performing a more thorough cleaning with the help of a muriatic acid solution. Follow these simple steps to make your toilet flush stronger:

STEP 1

Take a wire or clothespin, and with the help of tweezers, bend it into a curved shape to access the holes on the inside edge of the toilet. Insert the hook into each of the holes to remove debris that could be obstructing the flow of water. Flush the toilet a few times to confirm that the toilet is flushing harder and with more water pressure.

STEP 2

If the toilet flush is still slow, try a more thorough cleaning by mixing one part muriatic acid and ten parts water in a container, being careful not to splash the liquid. Make sure to wear rubber gloves, a mask, and an eye shield. Remember to also open a window to keep the bathroom ventilated throughout the process.

STEP 3

Lift the toilet tank lid off of the toilet and set it aside, being careful not to break it. Subsequently, place a funnel in the drain tube and pour half of the liquid from the container.

STEP 4

After 30 minutes, pour the rest of the solution into the drain tube. Allow another 30 minutes and flush down the toilet. You may need to flush several times for the muriatic acid to unclog the holes with each flush.

Remember that for your toilet to function properly, it must be well maintained, which will also allow you to extend the life of your toilet. Take these points into account to keep things running smoothly:

Cleaning and Preventing Clogging

It is advisable to wash the toilet daily with specialized products to clean and disinfect it. It is important to clean both the inside and the outside of the bowl. Keeping the discharge system clean will prevent clogging problems in the future and can help with flushing power.

Repair and Replacement of Damaged Parts

To keep your toilet flushing strong, it is essential to periodically check that no part of the flush mechanism is damaged or has a malfunction. If you find any part that is broken or not working properly, it needs to be repaired or replaced.

If this is the case, write down the special characteristics of the part that you need to change and go to a specialized home repair store to get it. You can purchase and install the part yourself or call a plumber to do it if you don’t know how to do it.

Water Flow – Why Does My Toilet Have a Weak Flush?

Some toilets are designed to save water, so the flush can be slow or weak. This can be another reason why the toilet is not flushing hard. If the water level is low, adjust the float arm up to give the tank more capacity. Then, check the water level by flushing.

Remember that you should not use the toilet bowl as a trash can, as it can get clogged. If this is the case, you can use commercial products to unclog the toilet. However, you can do it with these simple remedies:

Obstruction Test

You should first confirm that the slow flushing toilet is really clogged and it is not a malfunction in the drain system. To check, fill a bucket with water and flush it down the toilet. If the water runs off slowly, you will confirm that your toilet is clogged.

Use Hot Water

Pour a large amount of hot water into a bucket and flush it down the toilet. Do it quickly and with force, taking care that the water does not leak. Sometimes this method is enough to unclog the pipe.

Baking Soda and Vinegar

This is one of the most used methods for unclogging pipes. All you have to do is dissolve in a clean container three tablespoons of baking soda in two cups of vinegar. Then, pour the mixture down the toilet. The reaction between these two ingredients will help remove the clog in about 5 minutes.

Toilet Plunger or Drain Opener

Use a drain opener that you can find in any supermarket. Place the cup along the drain opening, then pump up and down hard. Repeat the procedure until you can unclog the toilet.

If your toilet is very old, it may be time to change it for a more current design. An eco-grade toilet will work well and help you save up to 63 liters of water per week, based on the average use of a single person.

Flushing toilet

Conclusion

All of these tips can go a long way toward making your toilet flush stronger. However, several reasons could be causing your toilet to have a slow flush. Usually, toilet clogs do not occur too far from the bottom opening of the toilet.

However, the obstruction may be in the main sewer. If this is the case, it is best to call a specialist. If toilet drain problems persist, a plumber can be of great help in troubleshooting plumbing problems.

Frequently Asked Questions (FAQ)

Here are the answers to some of the more commonly asked questions regarding how to get a stronger flush.

Why does my toilet have a weak flush?

If you have a weak flushing toilet, it may be due to the waste pipe, siphon jet, or rim jets becoming clogged. The water level in the toilet tank may also be too low. If any of this is the case, you need to clear the blockage and correct the toilet’s water levels to get a stronger flush.

Can I convert my toilet to a power flushing system?

Yes. Almost any toilet can be converted to a power flushing system. However, the technology used for these toilets is pretty basic. Simply put, a bladder compresses a small bit of air inside the toilet after it is flushed, and this air is used to push the water under pressure through the toilet.

Leave a Comment

Your email address will not be published. Required fields are marked *