Electrolux dryers are constantly rated as the top choices for quality. If you own one, you are likely familiar with the reliability of these appliances, but you might also be dealing with some commonly reported issues. For instance, your Electrolux dryer doesn’t start at all and just makes a beeping noise.
If your Electrolux dryer won’t start and just beeps, it might be because the door is not properly shut. Other causes include thermal fuse or control board issues or a faulty start switch. To fix these problems, ensure the door is closed properly or replace the faulty parts.
Stick around if you want to learn more about what causes Electrolux dryers to beep constantly without starting. I will also cover some useful solutions for each of the causes. Let’s get started!
Electrolux Dryer Just Beeps
Is your Electrolux dryer beeping but not working? Here are the likeliest causes:
1. The Door Is Not Properly Shut
The simplest explanation for your dryer beeping but not starting is that the door hasn’t been closed properly. The dryer might be beeping to alert you of this problem. If your dryer’s Start button is flashing in addition to the beeping, it’s highly possible that this is the cause.
How To Fix
The first solution is to close the dryer’s door firmly and wait for it to make a clicking sound to indicate that the latch is engaging. If the problem persists, check if there are any clothes that may be preventing the door from closing. Remove the clothes and try again.
If the door still doesn’t close as it should, the problem might be the latch itself. A broken latch won’t be able to engage, and your dryer won’t start. In this case, you should contact a professional to replace the latch on the dryer door.
2. Thermal Fuse Issues
Another possible cause of your Electrolux dryer beeping but not starting is a blown thermal fuse. The thermal fuse is a small device inside the dryer that functions as a mechanism to prevent potential fires. When the temperature inside the dryer rises higher than it should, the fuse blows, preventing the dryer from working.
How To Fix
To fix this issue, you should replace the thermal fuse. Before you replace it, make sure that it’s indeed the fuse that is causing the problem and not something else. You can test the fuse using a multimeter and by following these steps:
Unplug the dryer from the power outlet.
Unscrew and remove the back panel.
Find the thermal fuse and disconnect it from the two attached wires.
Connect the multimeter to the two terminals and test the fuse.
Check the multimeter reading. If it’s around 1 Ohm, then the fuse has no issues. If not, it needs replacing.
You can replace a blown fuse yourself, but it’s safer to contact a professional if you’re unsure what to do. Before replacing it, check the vents for blockages since they commonly cause issues that result in the thermal fuse blowing.
3. The Start Switch Is Faulty
Usually, when you push the Start button, it sends a signal to the start switch so that the dryer motor begins working. A faulty switch won’t be able to start the dryer once it receives the signal from the button.
If everything else works fine, but the start switch is broken, your dryer won’t function at all. It’s possible that the Start button may be the cause of the issue instead of the start switch. In this case, you can test and fix it in a few steps.
How To Fix
Before you try fixing a start switch issue, you should be certain that it is indeed the reason your Electrolux dryer isn’t working and is making a beeping noise. To find out, you need to listen carefully after pushing the Start button. If there is no noise coming from the dryer, the start switch is likely no longer working.
To fix the start switch, it’s best to contact a professional to replace the faulty part.
If none of the above issues is causing the Electrolux dryer to stop working and beeping, there might be a problem with the electronic control board. The control board is a circuit that controls how the dryer works and when it’s damaged, it can cause several different problems, including the issue you’re facing.
How To Fix
The best way of fixing a control board issue is to replace it with a new one. This is typically a job for a professional, although you can give it a go if you feel confident and follow instructions closely. However, before you contact a professional or buy a brand new control board, you may want to check to ensure that the control board is indeed the cause of your Electrolux dryer not starting.
To check, you need access to the control circuit, which means opening the back panel. Follow these steps to check your dryer’s control panel:
Unplug the Electrolux dryer from power.
Open the top panel by removing the screws with a screwdriver.
Locate the control board circuit and inspect it for any damage, including burnt or shorted parts.
If you see signs of damage, take a picture of the wiring around the board since you’ll have to remove it and connect the wires to the replacement.
Remove the control board by disconnecting it from the wires.
You can buy a new control board online or at an electronics store if you have your Electrolux dryer’s model and serial number.
Summary
If your Electrolux dryer doesn’t start and makes beeping noises, it may be a problem as simple as an incorrectly shut dryer door. However, it might also be a more serious issue, like a blown a fuse, faulty start switch, or a damaged control board.
You can check the various parts to find out which one is the cause of the issue and then try to fix it. In the best-case scenario, you’ll only have to shut the door more firmly, but in other cases, you may need to call a professional to replace a part.
